Charging Management System
One platform to run your EV charging network: hardware integration, live session monitoring, and remote charging control, built on the open OCPP standard so it isn't locked to a single charger brand.
Two charging options, one system
The same dashboard runs both charger types: pick the right one for the location, not the other way around.
AC CHARGER
7-22 kW
- Full charge in approximately 3-10 hours, depending on battery capacity and vehicle onboard charger
- Lower installation cost
- Best for homes, offices, and long-stay parking
DC FAST CHARGER
60-120 kW
- Typically 10-80% charge in 30-60 minutes, varying by vehicle and charger output
- Higher investment and infrastructure needs
- Best for public areas: gas stations, rest stops
Charging times are estimates and depend on the vehicle's battery capacity, its onboard charger, and the charger's actual power output on site.
OCPP Protocol Support
Runs on OCPP 1.6J and is upgrade-ready for 2.0.1, interoperable with charger hardware from multiple vendors.
Vehicle Authentication
RFID card, QR code, or vehicle/unit ID: only authorized users can start a session, online or offline.
Session Monitoring
Start/stop timestamps, kWh delivered, and duration: logged for every session and streamed live to the dashboard.
Smart Charging Control
Start or stop sessions remotely from the server, with time-slot schedules and power limits per connector.
One dashboard for every charge point
See every station's live status, review session history, and manage master data for chargers and ID tags, without switching tools.
- Live status per connector: available, charging, faulted, offline
- Searchable session history for every charge point
- Remote diagnostics and firmware update requests
Tap a charge point to cycle its status.
Smart, configurable charging
Set the rules once: schedules, power limits, and load balancing keep every session inside your site's real electrical capacity.
- Time-slot scheduling and power limits per connector
- Load balancing across multiple charge points
- Operator-controlled remote start/stop
Secure by design
Authentication and encryption are built in from the connector to the cloud, not bolted on afterward.
- RFID / QR / vehicle-ID authentication, with offline caching
- Encrypted device-to-server communication (WSS + client certificate)
- Configurable safety limits: over/under-voltage and current per connector
Built to scale, layer by layer
From the charge point to the dashboard in your operator's hand: three layers, each doing one job.
Charge Point + Gateway
Hardware, device communication, OCPP handling
Message Broker + Database
Real-time data, session storage, control logic
Dashboard + Third-Party Apps
Operator dashboard, mobile apps, integrations
